Saturn 3 Door Coupes SC1 and SC2

Cranks, but no start

Thread Tools
 
Search this Thread
 
  #71  
Old 01-02-2023, 01:10 PM
Dude's Avatar
Senior Member
Join Date: Mar 2019
Location: Pennsultucky
Posts: 166
Default

I Agree w/Andy but I would R/R fuel filter and I suspect the FPR fuel press regulator may be bleeding by. both are cheap and the Filter needs to go anyhow with all that trash in system. The FPR is cheap insurance too.
 
  #72  
Old 01-02-2023, 02:26 PM
Hupp36's Avatar
Member
Thread Starter
Join Date: Nov 2022
Posts: 37
Default

I put a new filter on the frame rail after I installed the new pump. I will find what you call a noid light for my car. Thank you for the help, all of you. Its good to have people that can help..
 
  #73  
Old 01-05-2023, 01:35 PM
Hupp36's Avatar
Member
Thread Starter
Join Date: Nov 2022
Posts: 37
Default

Update, Not sure what i did when I installed the new starter , but I must have un plugged the fuel injector wire harness. When I went to plug in the noid light , the wiring harness felt loose. I plugged it back and installed the light, I had my sweet little wife turn the car over and I could not believe it started on 3 cyl. Shut it down and put the wire back on the injector and it runs like top. I need to thank all of you that helped me. This forum is the greatest. As soon as I clean the car up, I will post a pic of it.
 
  #74  
Old 01-05-2023, 03:04 PM
Dude's Avatar
Senior Member
Join Date: Mar 2019
Location: Pennsultucky
Posts: 166
Default

Outstanding Hupp!

 
  #75  
Old 01-05-2023, 04:28 PM
derf's Avatar
Super Moderator
Join Date: Jul 2005
Location: Slightly off center
Posts: 10,424
Default

Congrats.

Another one back on the road.

Feel free to stick around the forum.
 
  #76  
Old 01-05-2023, 07:57 PM
02 LW300's Avatar
Super Moderator
Join Date: Apr 2015
Location: Willamette Valley, Oregon
Posts: 2,368
Default

Great news!
 
  #77  
Old 01-07-2023, 02:11 PM
Hupp36's Avatar
Member
Thread Starter
Join Date: Nov 2022
Posts: 37
Default

Here is a pic of my little gem, could use a little paint.
 

Last edited by Hupp36; 01-07-2023 at 02:12 PM. Reason: Could not see the pic
  #78  
Old 01-07-2023, 02:19 PM
Hupp36's Avatar
Member
Thread Starter
Join Date: Nov 2022
Posts: 37
Default

Sorry I can not get the pic to load.
 
  #79  
Old 01-18-2023, 01:09 PM
Hupp36's Avatar
Member
Thread Starter
Join Date: Nov 2022
Posts: 37
Default

Lets try to load pic again.

 
  #80  
Old 01-18-2023, 02:20 PM
Rubehayseed's Avatar
Senior Member
Join Date: Jul 2011
Location: Anniston, AL
Posts: 4,946
Default

MAACO, baby! LOL
 


Quick Reply: Cranks, but no start



All times are GMT -5. The time now is 06:38 AM.