Saturn 3 Door Coupes SC1 and SC2

sc2 trouble codes

Thread Tools
 
Search this Thread
 
  #11  
Old 05-02-2013, 11:28 AM
OceanArcher's Avatar
Banned
Join Date: Jul 2008
Location: Riveria of America
Posts: 2,748
Default

Drop a line after the fix, and let us know how it went, please ....
 
  #12  
Old 05-03-2013, 01:26 PM
john doe's Avatar
Senior Member
Thread Starter
Join Date: Dec 2010
Location: pennsylvania
Posts: 183
Default

will do...............
ya know i could have just went and replaced 2 of the solenoids for 40 bucks (20 each on ebay )but for the money i dont see how i can go wrong with the whole reman valve body for 120.00 shipped .if i sell the left overs for half that then i will have got a great deal .
 

Last edited by john doe; 05-03-2013 at 01:29 PM.
  #13  
Old 05-10-2013, 06:14 PM
john doe's Avatar
Senior Member
Thread Starter
Join Date: Dec 2010
Location: pennsylvania
Posts: 183
Default

looks like next week .gotta rent a inch pound torque wrench and its been rainy last few days .will update soon.

i did get the valve body and its nicely packaged ,all the solenoids ohm out the same 5.0 .
 
  #14  
Old 05-14-2013, 01:40 PM
john doe's Avatar
Senior Member
Thread Starter
Join Date: Dec 2010
Location: pennsylvania
Posts: 183
Default

put the reman valve body in today .took about 1 1/2 hours total time .
thats removing the air intake tubes and filter housing
removing the battery
remove the battery tray
move computer out the way
tie the wires up out the way
blow all dirt away with compressed air and clean top of pan
remove the trans dog bone mount
remove the pan
remove the valve body and drop in the replacement .
torque all bolts to 97 inch pounds and put it all back together .

works great!!check engine light went right out when i started the car and it shifts just fine .
for 120.00 shipped i am glad i bought the whole valve body as these seem to be problematic anyway.

now i see the price went up to 135.00 for this reman valve body .
anyway it was pretty easy .had to borrow a torque wrench that done inch pounds but other than that it was a walk in the park .

now on to that muffler next....lol
 
  #15  
Old 05-15-2013, 04:16 AM
uncljohn's Avatar
Senior Member
Join Date: Mar 2010
Location: Peoria AZ
Posts: 1,912
Default

Congratulations and all the credit that goes with it.
 
  #16  
Old 05-15-2013, 05:23 PM
RjION's Avatar
Senior Member
Join Date: Dec 2008
Location: Arizona
Posts: 2,026
Default

I'll give you a thumbs up................hope all is working well.
 
  #17  
Old 05-16-2013, 07:25 AM
john doe's Avatar
Senior Member
Thread Starter
Join Date: Dec 2010
Location: pennsylvania
Posts: 183
Default

working great!!
my first ever valve body job too ,couldnt have been easier .i think i will go drop that muffler now and see where its leaking .might patch it for now .

looking at replacement mufflers online (autozone/napa) they look like standard stuff but the factory oem muffler sure looks different .weird shape .
 
  #18  
Old 04-30-2014, 08:43 AM
john doe's Avatar
Senior Member
Thread Starter
Join Date: Dec 2010
Location: pennsylvania
Posts: 183
Default

just an update . i used some jb weld type putty on the muffler hole and its been holding fine since my last post in this thread .
trans is going along fine too .
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jpete
General Tech Help
1
01-13-2010 05:45 PM
ralph
General Tech Help
1
10-22-2008 10:22 AM
lil bull
Saturn S Series Sedan
5
02-02-2008 06:58 PM
23ska
General Tech Help
10
04-02-2007 05:13 PM
rickatom
Saturn 3 Door Coupes
5
12-11-2006 04:56 PM



Quick Reply: sc2 trouble codes



All times are GMT -5. The time now is 03:46 PM.