2009 saturn vue XR short in wiring(i believe)

Old Mar 23, 2020 | 12:56 PM
  #1  
wotring80's Avatar
Thread Starter
|
Junior Member
Joined: Jan 2020
Posts: 6
Default 2009 saturn vue XR short in wiring(i believe)

Hello all,
I have had a recent issue with my car. I was driving it down the highway with cruise control and when I turned on my blinker to get in the passing lane it kicked it out of cruise control and flashed the traction control light as well as messing with the stereo. I believe it switched the stereo over to CD but it could have shut it off for about 30 seconds then the stereo continues as nothing happened. It does this when I turn on the blinker either direction. If I flash my brights by pulling the brights stick back to me it does all the same stuff listed above but my traction control light and a couple of others stay on until I slow down and pull off to the side of the road it seems. Any help would be greatly appreciated.
 
Old Mar 23, 2020 | 01:08 PM
  #2  
wotring80's Avatar
Thread Starter
|
Junior Member
Joined: Jan 2020
Posts: 6
Default

Also, there are no codes being thrown
 
Old Mar 23, 2020 | 02:27 PM
  #3  
02 LW300's Avatar
Super Moderator
Joined: Apr 2015
Posts: 3,229
From: Willamette Valley, Oregon
Default

Sounds like a body control module issue to me. Are your cruise and radio controls on the steering wheel? If so they run through the clock spring to the bcm. Your blinker/dimmer switch are below the clock spring but still run to the bcm. If all your exterior bulbs work correctly then I would contact your full service repair facility. Turn signals and brake lights are separate bulbs on newer cars so a burned out bulb should not cancel the cruise control.
 
Old Mar 24, 2020 | 09:20 AM
  #4  
wotring80's Avatar
Thread Starter
|
Junior Member
Joined: Jan 2020
Posts: 6
Default

Yes cruise and radio controls are on the steering wheel. Sorry for the stupid question. I have never worked with a BCM but is that something that a repair facility has to do or is it a plug and play kind of thing
 
Old Mar 24, 2020 | 11:20 AM
  #5  
02 LW300's Avatar
Super Moderator
Joined: Apr 2015
Posts: 3,229
From: Willamette Valley, Oregon
Default

A full service shop with the proper equipment should be able to program a new bcm. I would discuss this with them, it will require dealer level equipment.
 
Old Mar 24, 2020 | 11:36 AM
  #6  
wotring80's Avatar
Thread Starter
|
Junior Member
Joined: Jan 2020
Posts: 6
Default

Great thank you I just called. I will keep everyone posted
 
Old Mar 25, 2020 | 04:14 AM
  #7  
derf's Avatar
Super Moderator
Joined: Jul 2005
Posts: 12,315
From: Slightly off center
Default

Be sure to call around. Absurdly high estimates will come from the dealers that want nothing to do with you.
Should cost in the neighborhood of $500 for the BCM module, say $100 for diagnosis, and two hours labor at $120 each so somewhere between $700 and $800.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Resshin
Saturn S Series Sedan
4
Aug 1, 2019 06:11 AM
randomrikki
Saturn Ion
0
Jul 30, 2010 12:00 PM
naener80
General Tech Help
4
Jun 12, 2009 12:34 AM
tspork
General Tech Help
8
Mar 23, 2009 12:39 PM
scootertrash11
Saturn L300
3
Oct 16, 2008 05:27 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:09 AM.