Ion 2 2.2 - desperately need clutch line
#1
Ion 2 2.2 - desperately need clutch line
Long story short, I installed a new clutch kit. When I bled the clutch, I pushed the line all the way in and pushed the clip into place. As soon as I get any pressure at the pedal, the line moves out of the slave spout about a mm and fluid comes out of the bleed port. It will not come out entirely unless I pull up on the clip. The fitting is pretty rusty... It didn't have this problem before the clutch failed. If anyone has a line please let me know, or any ideas. Thank you so much
Thread
Thread Starter
Forum
Replies
Last Post