it shows as special order ish 62.99 . If he found one somewhere he's luckier than hell.

Goalie --is this a DIy or shop job?

 

A shop did mine because I got in the car to go to work when it went out, so I didn't have time to mess with it.
But after thinking it though, it seems pretty simple. They were able to do it from the top.

 

independent of slave (unlike S series)?

 

yes sir

 

well if I can replace a pre-bled master/slave combo with 5 rotating joints, there so you can maneuver it into place AND latch it to the firewall, then this should be easy.

Does Mandee need to worry about extraneous extra parts/ should she check under the hood for collateral damage? Would suck to get the part and find something else is needed

 

My master only went out because the hydraulic line imploded, causing the master to backfire into itself.

 

ah, pressure rises rises rises blammmmmmm

Mandee you probably want to check under the hood to see if there is any other damage.

Also, if someone with access to AllData could provide the R &R procedure to Mandee that would be mighty cool.

 

Well patrick took out the master cylinder last night. Hoping to pick one up from oreily later today. Blah. I swear i cant win this weekend.

 

Wtf is the r&r procedure?

Yea patrick pulled it out from the top of the engine last night...

 

Person he talked to at oreily told him $30something