ok heres the story, i destroyed my engine on my 1999 saturn SC2, we decided to rebulild it, took it out ourselfs and sent it in to get rebult, got it back and put it back in, we hooked everything up and started it up while still on the stands, fired up great no problems, let it run for awhile and no codes or anything. A week later came back put the wheels on and lowerd it, tried to start it and after a hesitation started but got a "check engine light" ran the codes and got a: cylender 3 misfire and a EVAP can. turned it off and tryed to start it agan but only got a clicking noise, so we replaced the starter, tryed again same story just a clicking noise, got the battery tested, it was fine, checked the flywheel and it looked fine. I DONT GET IT!!!!!! please help im out of ideas! Edited by: Faster=Better

 

Rotten positive battery cable?

 

Rotate your engine by hand. Make sure its not seized.