Well, we cleaned the icm ground bolts and changed the crank pos sensor just cause its $10. Still Cranks bit no start

 

Have you done a compression test?

 

I have not, not a terrible idea just havent because it ran before the starter went.

 

After alot of testing wires and power we found the crank position sensor wasnt getting power the plug needed a cleaning and the cpk we bought was bad. also the starter was wired wrong, we just weren't paying attention ig. thanks all for the help. so in short our cpk was bad we messed up our starter wires and the cpk we bought was defective(what luck).

 

Thanks for the update, back on the road again!

 

I'm guessing you got that cpk sensor at Autozone.