Saturn Forum - Saturn Enthusiasts Forums

Engine & Internal Chat about beefing up your engine's insides here...

1994 sl2

Thread Tools
 
Search this Thread
 
  #41  
Old 08-11-2009, 09:12 PM
derf's Avatar
Super Moderator
Join Date: Jul 2005
Location: Slightly off center
Posts: 10,422
Default
did you clear code after replacing the EGR solenoid?
 
Reply
  #42  
Old 08-12-2009, 05:51 AM
paulsl2's Avatar
Member
Thread Starter
Join Date: Jun 2009
Location: conn.
Posts: 58
Default
Yes i did i have made that mastake before ,spoke with my friend who works in a repair shop he said to change the O2 sensor next ,what do you think?
 
Last edited by paulsl2; 08-12-2009 at 11:32 AM.
Reply
  #43  
Old 08-12-2009, 07:08 AM
derf's Avatar
Super Moderator
Join Date: Jul 2005
Location: Slightly off center
Posts: 10,422
Default
Are you 100% positive there is no vacuum leak at the EGR solenoid?
 
Reply
  #44  
Old 08-12-2009, 08:33 AM
paulsl2's Avatar
Member
Thread Starter
Join Date: Jun 2009
Location: conn.
Posts: 58
Default
I will check again.
 
Reply
  #45  
Old 08-13-2009, 11:59 AM
paulsl2's Avatar
Member
Thread Starter
Join Date: Jun 2009
Location: conn.
Posts: 58
Default
no vacuum leaks that I can find all lines are good ,I am going to get a different solenoid an try that ,this one just dosn't seem right.
I can pick it up from NAPA for $37.50
 
Last edited by paulsl2; 08-13-2009 at 07:48 PM.
Reply
  #46  
Old 08-14-2009, 12:32 AM
derf's Avatar
Super Moderator
Join Date: Jul 2005
Location: Slightly off center
Posts: 10,422
Default
go oem if you can.....
 
Reply
  #47  
Old 08-14-2009, 08:27 AM
paulsl2's Avatar
Member
Thread Starter
Join Date: Jun 2009
Location: conn.
Posts: 58
Default
where can I get OEM parts?
 
Reply
  #48  
Old 08-14-2009, 04:56 PM
derf's Avatar
Super Moderator
Join Date: Jul 2005
Location: Slightly off center
Posts: 10,422
Default
Your nearest Saturn Dealer -- if there are any left for the 94's
 
Reply
  #49  
Old 08-17-2009, 05:59 AM
paulsl2's Avatar
Member
Thread Starter
Join Date: Jun 2009
Location: conn.
Posts: 58
Default
installed new sensor same thing ,code 26, all vacuum hoses were good no leaks and did pull batt wire next i am going to try O2 sensor , will keep posted on progess
 
Reply
  #50  
Old 08-19-2009, 05:58 AM
paulsl2's Avatar
Member
Thread Starter
Join Date: Jun 2009
Location: conn.
Posts: 58
Default
well I replaced the O2 sensor the E G R solenoid still getting a 26 code ,
New spark plugs new spark plug wire new P C V valve what now?
 
Reply



Advanced Search
Quick Reply: 1994 sl2


Reply Closed Thread Share

All times are GMT -5. The time now is 04:24 AM.