Left turn signal “freezes” when brake lights come on.
Thread Starter
|
Junior Member
Joined: Sep 2024
Posts: 5
From: South East Florida
Left turn signal “freezes” when brake lights come on.
I’ve been having a problem where the Left turn signal “freezes” when the brake lights come on. The left front turn signal also illuminates (and freezes) when turning left with the brakes applied. Is this common?
Super Moderator
Joined: Jul 2005
Posts: 12,315
From: Slightly off center
Since it happens in both front and back for turn signal behavior on that side, I'm assuming the brake light is a 2057 double filament parking running light and turn signal is a separate bulb.
Thought is they share a common ground splice pack or used to -- but now the turn signal bulb is receiving both the current mediated by the flasher + the steady current that goes through the brake light filament. Which would seemingly imply that current flowing through the bulb when braking flows out of the brake light bulb and through the turn signal bulb instead of to ground.
Not sure whether that spice pak is though.
Just a guess
Thought is they share a common ground splice pack or used to -- but now the turn signal bulb is receiving both the current mediated by the flasher + the steady current that goes through the brake light filament. Which would seemingly imply that current flowing through the bulb when braking flows out of the brake light bulb and through the turn signal bulb instead of to ground.
Not sure whether that spice pak is though.
Just a guess
Senior Member
Joined: Jun 2020
Posts: 300
From: Newport News, VA
Charm shows the ground splice pack (G401) for the left rear bulbs. Saturn Vue grounds
Last edited by oldmarine; Oct 29, 2024 at 07:51 PM.
Thread
Thread Starter
Forum
Replies
Last Post
