Saturn S Series Sedan SL, SL1, and SL2

'98 SL2: Turns Over, Won't Start

Thread Tools
 
Search this Thread
 
  #1  
Old 01-17-2013, 11:53 AM
TJGator's Avatar
Junior Member
Thread Starter
Join Date: Jan 2013
Posts: 3
Default '98 SL2: Turns Over, Won't Start

I have a 1998 SL2. The other morning, it started briefly but sputtered and died within 2-3 seconds. Since then, it turns over but will not start.

I replaced a coil pack that I thought could be the problem, with no luck. I am getting spark at the plugs.

I then pushed it into the garage and added a bottle of HEET, in hopes that water had frozen in the gas line. No luck again. I can hear the fuel pump engage when I turn the key to the on position. There is fuel pressure at the fuel rail, and I can smell fuel in the exhaust.

The night before it wouldn't start, it seemed to run fine. If anyone has any ideas on what else could be the trouble, I'd appreciate it.

Thanks!
 
  #2  
Old 01-17-2013, 02:38 PM
derf's Avatar
Super Moderator
Join Date: Jul 2005
Location: Slightly off center
Posts: 10,360
Default

Are you sure your battery's healthy?

Put the pedal to the floor and crank in 5 second intervals, then waiting to let your starter recover and not melt down. Occasionally they flood and the pedal to the floor shuts off the injectors to clear a flood.

Do this in a well ventilated area. It will likely spew out a huge cloud if it does start.

Also be sure you can get to the battery to charge it if the above does not work and you need to jump it.
 
  #3  
Old 01-17-2013, 04:45 PM
cspotkill's Avatar
Member
Join Date: Dec 2012
Location: Detroit
Posts: 48
Default

Crank sensor???
 
  #4  
Old 01-17-2013, 06:14 PM
derf's Avatar
Super Moderator
Join Date: Jul 2005
Location: Slightly off center
Posts: 10,360
Default

he has spark so crank sensor is good.........
 
  #5  
Old 01-17-2013, 07:20 PM
RjION's Avatar
Senior Member
Join Date: Dec 2008
Location: Arizona
Posts: 2,026
Default

I think this has been brought up a few times........

Read the link
https://www.saturnforum.com/forum/general-tech-help-13/etcs-its-connnector-6417/
 
  #6  
Old 01-17-2013, 07:23 PM
TJGator's Avatar
Junior Member
Thread Starter
Join Date: Jan 2013
Posts: 3
Default

Thanks for the help.

derf--

I tried it with the pedal to the floor, and it still didn't start. There is occasional cylinder firing--maybe once every second or so, not enough to sustain the engine.

As for the battery, I have it hooked up to a charger.
 
  #7  
Old 01-18-2013, 08:20 AM
TJGator's Avatar
Junior Member
Thread Starter
Join Date: Jan 2013
Posts: 3
Default

OK, this morning with a fully charged battery I got it to start with the gas pedal fully depressed.

Now to get a new temperature sensor....
 
  #8  
Old 01-18-2013, 03:01 PM
sw2cam's Avatar
Senior Member
Join Date: Mar 2006
Location: Arizona
Posts: 3,278
Default

and CONNECTOR buy both from the DEALER.
 
  #9  
Old 01-18-2013, 03:04 PM
OceanArcher's Avatar
Banned
Join Date: Jul 2008
Location: Riveria of America
Posts: 2,748
Default

Total cost for the parts from the dealership should run around $40usd ...
 
  #10  
Old 01-19-2013, 04:07 AM
derf's Avatar
Super Moderator
Join Date: Jul 2005
Location: Slightly off center
Posts: 10,360
Default

Glad to be of help.

My 97SC2 did this to me for only the second time in 16 years about a month ago. Last time it was -18F in Madison WI. This time turns out my battery was biting the dust simultaneously which I did not realize until after having to restart it while hooked to jumper cables (as the battery was already pretty toasted and would barely turn the engine over after the next restart). New battery and starts like a champ. May not be your issue but that is the source of my battery health question.

Definitely do the ects and connector from GM dealer--the original one is crap
 


Quick Reply: '98 SL2: Turns Over, Won't Start



All times are GMT -5. The time now is 05:50 AM.