Dirt Track SC2
#11
Sorry for the delay.
The generic "models through 95" diagram indicates that, with the fuel pump relay closed, current flows out of the IPJB pin D4 on a GREY wire all the way to the fuel pump.
The pump is grounded w a BLACK wire which heads into a ground splice pack.
Hoping one of the light brown looking single wires running next to those twisted pairs is a grey wire.
You can test the wire for V at key on. You should see 12V for about 3 seconds, then 0 as the pump completes its priming cycle.
The generic "models through 95" diagram indicates that, with the fuel pump relay closed, current flows out of the IPJB pin D4 on a GREY wire all the way to the fuel pump.
The pump is grounded w a BLACK wire which heads into a ground splice pack.
Hoping one of the light brown looking single wires running next to those twisted pairs is a grey wire.
You can test the wire for V at key on. You should see 12V for about 3 seconds, then 0 as the pump completes its priming cycle.
Thread
Thread Starter
Forum
Replies
Last Post
clement.j.joyal@gmail.com
New Member Area
2
01-05-2020 11:35 PM