Saturn Forum - Saturn Enthusiasts Forums
Notice the rim of backing plate is b bent by previous guy prying at 11 ocllock and 2 oclock. They will be straightened b4 completion. Almost correct assembly if the RR wheel w/ new hardware, cylinder, and shoesl. Notice how the yellow spring hooks into the little support spring on the right. In this photo, the adjuster lever below the starwheel has not been nudged up against the starwheel yet and the shoes need aligning befor drum install. I think the hardware is on in the correct manner??
Notice the rim of backing plate is b bent by previous guy prying at 11 ocllock and 2 oclock. They will be straightened b4 completion. Almost correct assembly if the RR wheel w/ new hardware, cylinder, and shoesl. Notice how the yellow spring hooks into the little support spring on the right. In this photo, the adjuster lever below the starwheel has not been nudged up against the starwheel yet and the shoes need aligning befor drum install. I think the hardware is on in the correct manner??
0 2018/03/31 18:21:08
Look carefully behind the backing plate to see the drywall screw.
Look carefully behind the backing plate to see the drywall screw.
0 2018/03/31 18:20:59
Here, the hardware is improperly installed and the cylinder has blown out as a result.
Here, the hardware is improperly installed and the cylinder has blown out as a result.
0 2018/03/31 18:20:35
Notice that the Hold down pin on the right is actually a drywall screw. this is in part why the car had no brakes when we bought it.
Notice that the Hold down pin on the right is actually a drywall screw. this is in part why the car had no brakes when we bought it.
0 2018/03/31 18:20:29
Right side mirror is chopped off. We bought a junkyard shell and painted it to match the matte black on the drive side.
Right side mirror is chopped off. We bought a junkyard shell and painted it to match the matte black on the drive side.
0 2018/03/31 18:12:35
The car came with coolant fans always running and it would not go into gear. Both flaws caused by tow truck driver disconnecting linkage
The car came with coolant fans always running and it would not go into gear. Both flaws caused by tow truck driver disconnecting linkage
0 2018/03/31 18:07:39
Both drive side windows are inoperable. the front one is held up by a wedge of wood. There is an old regulator in the trunk
Both drive side windows are inoperable. the front one is held up by a wedge of wood. There is an old regulator in the trunk
0 2018/03/31 18:07:24
Front and rear bumpers have both been hit and have lots of chips. Rear bumper anchoring at wheelwell was disconnected
Front and rear bumpers have both been hit and have lots of chips. Rear bumper anchoring at wheelwell was disconnected
0 2018/03/31 18:07:10
Hood was replaced and painted poorly with wrong color. So far its been water sanded and primered. Every body panel is straight
Hood was replaced and painted poorly with wrong color. So far its been water sanded and primered. Every body panel is straight
0 2018/03/31 18:07:04