removing rivets from ring gear
Thread Starter
|
Member
Joined: Dec 2019
Posts: 58
Transaxle LSD done
Would you be interested in doing a reassembly write up with step wise statements and pictures? It will become a sticky here on the forum. I don't believe, after all these years, we have anything like that for an S Series MP3.
Most members here have likely never seen the inside of an MP3, let alone worked on one.
It doesn't need to be a full explanation of how the thing works, but it can be.
Actually I'm not aware of any members here that have attempted as LSD swap in an MP3, so you could also Do a complete end to end write-up of the mod, though I understand that would be difficult do do for the part you've already executed.
Just a thought..no pressure.....🔨🤔💪🖖
Most members here have likely never seen the inside of an MP3, let alone worked on one.
It doesn't need to be a full explanation of how the thing works, but it can be.
Actually I'm not aware of any members here that have attempted as LSD swap in an MP3, so you could also Do a complete end to end write-up of the mod, though I understand that would be difficult do do for the part you've already executed.
Just a thought..no pressure.....🔨🤔💪🖖
I finished reassembling the Saturn Transaxle LSD. It went pretty well and on hind sight was not that complicated. The most difficult part of the whole thing was dealing with the snap rings that hold the top gear assembly bearings for the output shaft in place. That was a little tricky but I followed the youtube video and asked Kurt Bennett who produced the video to clarify some steps with those snap rings. He promptly replied with suggestions. So now I have a completed rebuilt engine. and LSD Transaxle I'm going to wait till early summer when I turn 81 finish work on the 98 SC2! I will attach the Kurt's youtube.
Thanks
Thread
Thread Starter
Forum
Replies
Last Post
CDCallahan
Saturn 3 Door Coupes
2
Jul 20, 2019 04:11 AM
