Meguiar's cleaner wax does not work well at 14° F
#1
Meguiar's cleaner wax does not work well at 14° F
(see above)
Now I have to find a way to heat my garage up. I suppose I can run the car for a while and let the engine heat the garage.
Depending on my state of mindlessness at the time I may even open the door
Now I have to find a way to heat my garage up. I suppose I can run the car for a while and let the engine heat the garage.
Depending on my state of mindlessness at the time I may even open the door
#3
Way too obvious.
Think about who you're dealing with.
I think I'll go out and spend pointless money on one of those propane blowtorch type heaters that are about 10" in diameter and melt pretty much anything within a foot of the exit hole.
I have personal experience with that... In my neighbor's garage.
Again consider who you are dealing with.
Suggestion taken.
Technically I am not allowed to work on my vehicle in my driveway per HOA rules. So I don't.
In the garage with the door down unless it is oppressively hot. I've switched over to a battery-powered impact gun and 3/8 impact wrench as my twin stack compressor cycles way too often when I am working and annoying the crap out of my neighbors who are currently my friends is not on my list of things to do right now. The impact gun is a dewalt with supposedly 1200 foot pounds of breakaway torque. Doubt that is true. That effing thing is loud. I have to wear hearing protection if I'm doing more than one wheel. Then again I can probably turn it up a notch to reduce the number of hammer strokes. Haven't gone there yet as I do not have the luxury of breaking things on the white car.
Oh look, off topic and I'm supposed to be working said the guy who was jealous of your retirement....jk you earned it man
Think about who you're dealing with.
I think I'll go out and spend pointless money on one of those propane blowtorch type heaters that are about 10" in diameter and melt pretty much anything within a foot of the exit hole.
I have personal experience with that... In my neighbor's garage.
Again consider who you are dealing with.
Suggestion taken.
Technically I am not allowed to work on my vehicle in my driveway per HOA rules. So I don't.
In the garage with the door down unless it is oppressively hot. I've switched over to a battery-powered impact gun and 3/8 impact wrench as my twin stack compressor cycles way too often when I am working and annoying the crap out of my neighbors who are currently my friends is not on my list of things to do right now. The impact gun is a dewalt with supposedly 1200 foot pounds of breakaway torque. Doubt that is true. That effing thing is loud. I have to wear hearing protection if I'm doing more than one wheel. Then again I can probably turn it up a notch to reduce the number of hammer strokes. Haven't gone there yet as I do not have the luxury of breaking things on the white car.
Oh look, off topic and I'm supposed to be working said the guy who was jealous of your retirement....jk you earned it man
Thread
Thread Starter
Forum
Replies
Last Post
jamnar
Off Topic
15
04-26-2017 03:53 PM
jamnar
Off Topic
21
07-27-2015 07:14 AM