Saturn  Forum - Saturn Enthusiasts Forums

Saturn Forum - Saturn Enthusiasts Forums (https://www.saturnforum.com/forum/)
-   New Member Area (https://www.saturnforum.com/forum/new-member-area-9/)
-   -   New member from Alabama (https://www.saturnforum.com/forum/new-member-area-9/new-member-alabama-8869/)

SBellew 11-03-2013 09:40 PM

New member from Alabama
 
Hi, my name is Scot. Got a '98 SC2 for $400 because the previous owner had several people look at it and noone could get it running after changing the fuel pump, computer and a couple other minor components.

Bit of voltmetering later, I found that the offshoot in the wiring harness to the fuel pump was corroded; changed that out and it ran like a champ.

Fast forward about 10k miles and a few months of driving 86 miles one way to work every day. Lose power, hear rattling, pull over and haul her home and turn it over and it starts but is weak and rattling. Sounds like a spun bearing to me.

Working at home now so she has been sitting about a year, but it is about time to get that engine fixed up!

Rubehayseed 11-03-2013 10:13 PM

Welcome to the Saturn forum, Scot. You can find a lot of help here as long as you follow the rules. When you say you heard rattling, are you sure it was a bearing and not some accessory under the hood like an alternator, or maybe an a/c or idler pulley? If it's been sitting a year, you've got your work cut out for you on the fuel system alone.

OceanArcher 11-04-2013 06:56 AM

Yes, Welcome to the Forum. Not sure where in Alabama you are, but if you're anywhere near Mobile, there's a first class Saturn-friendly Cadillac dealership on I-65 with a Saturn-trained workforce ...

SBellew 11-04-2013 01:44 PM


Originally Posted by Rubehayseed (Post 40885)
When you say you heard rattling, are you sure it was a bearing and not some accessory under the hood like an alternator, or maybe an a/c or idler pulley?

Yeah, I am pretty sure it is internal. Gonna roll the whole assembly out from under it and put the engine where I can get a good look at the bottom end.

sw2cam 11-04-2013 03:44 PM

Welcome to the forum, post a few pictures to this thread.

SBellew 11-04-2013 10:08 PM


Originally Posted by sw2cam (Post 40893)
Welcome to the forum, post a few pictures to this thread.

Cannot locate them on my computer right now. Will snap a few tomorrow as a 2nd 'before' shot.

Ltmartinvenegas 11-05-2013 12:53 PM

Welcome became a newbie myself not to long ago.


All times are GMT -5. The time now is 04:21 AM.


© 2024 MH Sub I, LLC dba Internet Brands