Saturn  Forum - Saturn Enthusiasts Forums

Saturn Forum - Saturn Enthusiasts Forums (https://www.saturnforum.com/forum/)
-   New Member Area (https://www.saturnforum.com/forum/new-member-area-9/)
-   -   I'm New and sort of in a bind 03 saturn ion 2 (https://www.saturnforum.com/forum/new-member-area-9/im-new-sort-bind-03-saturn-ion-2-a-11865/)

Ascalon 12-04-2019 11:59 PM

I'm New and sort of in a bind 03 saturn ion 2
 
Accidently pulled a fuse while car was running so the engine died when I put it back. I tried to turn the key but it won't crank or start. The battery is good and the last owner changed the starter. I tried to check the ignition switch but it's stubborn would not open to let me see if needed replacing. I put it back and decide to see about just getting a new one but a new problem comes up. The key is stuck in ignition cant turn it or take it out, tried to use the small trapdoor to pop it out doesn't work, tried to pop the lock cyclinder out still won't come out. Is there any other way to get the key and cyclinder out, so I can try to get it running again? Closest saturn dealer is 7hrs away and trying to make that my last option.

DropDead 12-05-2019 05:50 AM

You pressed the button in the trap door and it didn't work?
sounds like the spring mechanism internally broke.
do you have dash lights or anything?
Security light flashing?

Rubehayseed 12-05-2019 07:23 AM

You might try lightly tapping it with a hammer while turning it.

02 LW300 12-05-2019 10:07 AM

I would check all the fuses sometimes they cascade with a voltage spike and others blow.

Ascalon 12-05-2019 01:11 PM

Update
 
Spring was jammed got it undone now i have the key back but igntion won't turn all the way. I plan to check my fuses to see if the voltage spike happened.

derf 12-05-2019 09:58 PM

Chances are if you had a spring jammed, the ignition cylinder was probably misaligned relative to the ignition switch -- therefore no contact --> no cranking
I assume you'll be replacing the ignition cyl -- may want to do the switch depending on how it looks and where the spring was jammed.

DropDead 12-06-2019 01:44 AM

Was the ignition recall done?

derf 12-07-2019 03:48 AM

^^^ That's too obvious

DropDead 12-08-2019 05:48 AM

Your be surprised how many customers I get th at havemt had it done.

derf 12-08-2019 04:40 PM

You have a shop, DD?


All times are GMT -5. The time now is 05:30 AM.


© 2024 MH Sub I, LLC dba Internet Brands