I have about 28 saturns that I am parting out.Lots of good body parts,engines,trans,interior, you name it. I may even have the correctcolor.No problem shipping smaller parts. SC, SL, L100-L300, 1996-2002.

Do you have a sunroof motor? that would fit a 99 SC2?

I have a black '96 Saturn SC2 and am looking for the interior trim piece that covers the driver's rear view side mirror. It's almost a triangular piece. If you were to need to replace your driver's side mirror, you would have to unscrew this piece of interior cover or trim first. Do you still have this for sale?

hos -- how bout the interior drivers side door panel for a 97? The middle section that has the cloth is beginning to pull out of the rest of the panel -- from the looks of it this was meant to be assembled once.

Color is dark cloth

Please let me know if I am wrong

will 97 to 99 fit?

Derf, is that a SC or a Sl model? Either way, 97-99 will work although shipping may be a problem. Bonzilla63, I have that part, probably in a tan. Where does it need to go?

97sc2, sir

I have several of those models. I will check the colors and get back to you in the AM.

thx -- freight shouldn't be much -- finding a box will be interesting

I've got the door panels for a SC1 model in gray. I think the SCI models use a coarser fabric anyway.

power locks? what color are the streaks in the fabric?

I have a 94 SC2 with the odometer that does not work. I am under the impression at the moment that the odometer is a an electronic module that is seperate from the instrument panel proper. However I really do not kinow for sure with out looking this up.
At this point in time do you have something that will fit this particular car?

There are no streaks-just a coarse gray fabric similar to burlap.

my SC2's black with a black/red/funky beige streaky fabric -- guess it's a no go -- thanks for lookin though

Sorry, Uncljohn, I have no year specific parts for S cars older than 1995.

Hoseppi,
Thankyou for looking.

I have a black 2002 sl2. im looking for a center console cover. I just need the lid with the rod to attach it to the storage bin. Do you happen to have anything?

Thanks

Do you, by chance, have a LW2 being parted out at the moment? If so, I could use an oil pan.

Sorry, I can't help you on that one.I do have a complete motor that will work, but I don't like taking parts off complete engines. What happened to your oil pan? They can be welded.

Hey Hoseppi, I need a passenger side fender and fender molding (I guess that's what you call it, the piece in front of the door at the bottom of the fender) for a '96 SC2, preferably in white. What years fenders will fit the '96?

I've got one in gold or champagne or whatever that color is called. It's kind of bulky, and I'm really not set up to ship items like this. I think someone has already stated which years will work. The one I have is from a 95 SC2.

Thanks for the response. If you're not set up to ship, I'll probably by an aftermarket.

hay i need the ignition assembly of a automatic sc2 mine is an 02
needs to look like that one
http://i20.photobucket.com/albums/b218/90chevys10blazer/P1010998.jpg
do you have one and how much shipped ?

i just noticed your in MD I'm in Glen Burnie so i could just pick it up

also how much for a 1.9 dohc block ??

SNIP
I've got one in gold or champagne or whatever that color is called. It's kind of bulky, and I'm really not set up to ship items like this. I think someone has already stated which years will work. The one I have is from a 95 SC2.
SNIP
I shipped a number of front fenders at one point in time by wrapping them in bubble wrap and packing tape. Using this method got them under the UPS LxWxD measurement which kept shipping costs way down and there was no problem in damage. Bubble wrap purchased in large roles from a store called Staples, an office supply store.
For what it is worth, U didn't run accross a 94 instrument cluster in your pick a part run did you?

Gianetti you can call me @ 240-447-4880. I think I can help you on both items. Uncljohn, no luck yet, but I will be going up again this week. Let me know if you find one in the mean time.

Will Do!

Okay, i will give you a call tomorrow ......

hoseppi i tryed calling but only got a answering machine im still real interested in the ignition assembly and the engine ...

hey, do you have a rear drivers quarter panel, rear bumper cover, and a hood for a 2000 sl2? oh, and a front passangers steering knuckle?

Adam, that stuff sounds kind of bulky-where are you located? Gianetti, I'm home now, give me a call.

i'm located in connecticut

hoseppi:
Do you have any parts for IONs?
I need: 1. Radiator support Upper tie bar, p/n : 10355371
2. Left Upper rail, p/n: 22 68 64 83
Thanks
Louis5

Sorry, no Ion parts.

I have a 96 SW1, looking for a set of injectors and a good TB. Also would you have a maroon gas cap cover. One other thing is a set of 99 rods, the longer ones. Wanting to rebuild a spare short block with the longer rods, hoping to squeeze a little more torque out of it.
Thanks Rick

I'm looking for the console power windows switch for a 2001 Saturn SL2.

That's the square one that has the mirror controller with the window switches.

Oh, and it's a 4 door.

Looking for 1999 sl2 dohc engine with calif. emissions?

I have a few 97 Dohc and a 2002 Dohc engine. All engines are low mileage and still in the wrecked cars. Let me know if one will work for you.

Any radiators that are in decent shape? Just curious. There seem to be a lot of these saturns with severly degraded rads around. Mine is starting to leak pretty steadily now.

1999 SL2

I am looking for both headlights and possibly a hood (dark green, I don't want to paint :D) and also the bumper, for a 2001 Saturn SL-1. Do you by any chance have these and if so how much? I can pick up.

Porcupine14- I don't think I would go with a used radiator. Capjack, I have those items in green. I will trade them for champagne or gold colored ones.

I don't have any champagne or gold colored ones. What would you want for each item to sell them outright?

I'll let you know after I talk to my painter. I'll have to see if it will be less expensive for me to paint these or buy the correct color for my car.

Hi,

This might sound a little weird but would you have any junked manual transaxle for any year SL1s that you would consider getting rid of????

Thanks!!!

Chris

I do have a few transmissions for the SOHC. Are you looking for parts(you said "junked manual transaxle") or the whole transmission?

Well, what I really need is a housing and a primary shaft but I would take the whole transmission if you have it. How much do you usually ask for them???

Thanks!

I have a 96 SW1, looking for a set of injectors and a good TB. Also would you have a maroon gas cap cover. One other thing is a set of 99 rods, the longer ones. Wanting to rebuild a spare short block with the longer rods, hoping to squeeze a little more torque out of it.
Thanks Rick


Can't do that!!!! the rods are longer but the pin is higher in the piston and you'd get some interference problems with that setup ..... what you want to do is get a 99 and up short block with appropriate crank, rods and pistons and then just bolt on an early style head. Both early and late had 9.25:1 compression but early pistons are "deep dished" and the heads have "flat" valves. Late versions have a much shallower dish in the piston but the valve faces are concave. Late short block with early head would give you somewhere around 10:1 compression and you'll have to use the intake (late or early) that matches the car it's going in cause the fuel pressure regulators aren't plugged in the same.

Hope this helps!!!

150$complete but the freight may be prohibitive.

i am willing to drive there to pick one up if you have it..
1999 1.9 DOHC motor.. i would need the intake, injectors, pulleys, pretty much a complete motor that i could drop in.. i dont need an alt unless you have a 108 Amp alt.. PM me a price.. i wanna drive this car again.. lol..

edit: just looked i am not that far from MD.. i will def drive and maybe meet halfway or somethin... like i said PM me..

I have a complete '97 and a complete '02- neither of which would be plug and play. Is the original engine burned up or destroyed?

competely destroyed... it resides in the scrap yard... how much dif is the 97 from the 99 and how much dif is the 02 fromt he 99?? isnt the 02 an eco tech motor?? like i said you are guarenteed a sale provided it wont be too hard to drop one of these in.. and the price is good... lol

150$complete but the freight may be prohibitive.

yeah .... sorry about that .... just backtracked through the treads and realized you're in CT!!!!

Thanks anyways!!!

competely destroyed... it resides in the scrap yard... how much dif is the 97 from the 99 and how much dif is the 02 fromt he 99?? isnt the 02 an eco tech motor?? like i said you are guarenteed a sale provided it wont be too hard to drop one of these in.. and the price is good... lol


99 and 02 should be exactly the same ..... 97 is the early style and you can drop it in but you'll have to take the intake off and swap for the late style cause the fuel pressure regulator doesn't plug in the same way ..... I've dropped a late (99) motor in a early (97) car before and other than the intake swap everything went fine. The late also has an added webbing cast in the front of the block so an early block heater won't fit. The location of the knock sensor is a bit different so you can't swap crankshafts and internal stuff but the plugs and signals are the same so the ECU will work anyways. The "ultimate" setup is late style shortblock with early style head and whichever intake (early or late) that matches the car it's going into. This setup raises compression by almost 1 point!!!!

ill take the 02... how much?? ?PM me a price plz...

What kind of wheels do you have? all stock ones?

That is correct.

do you have the armrest assembly that will fit a 97 sl2?

I looking for a good low mile transmittin for a Saturn SL2 2002. got any of them handy?
also the motor mounts.
my transmittion is trashed. dropping into gear real hard every gear every time.
thanks
Janet:)

Do you have a hood and front bumper for an 00 SL2 4 dr? Preferably Blue in color?

If this thread is still active, I need 2 good rubber pedal pads for a '99 SL2 5spd. Thx

It's active if someone posts in it ..

Thanks

I have them. Do you want to pick them up or will they need to be shipped? Your location should be part of your ID.

Thanks for the prompt reply! How much + shipping to 46616?

Thanks for the prompt reply! How much + shipping to 46616?


hoseppi:

Has always been prompt and helpfull on this site, he be a good man. Umm unless he's a woman.

I have them. Do you want to pick them up or will they need to be shipped? Your location should be part of your ID.


No reply?

all good things take time.
Hoseppi is a good thing.
The guy has like 30 saturns in his yard -- he'll be back

Sorry, I own a cut your own Christmas tree farm and tis the season...Ok, I see you put your location in your ID so I know they will have to be shipped.Pm me with an exact address and I will give you the price with shipping. FYI, RjION, I am a guy, but you're right-there are a lot of females that frequent these sites.

Your a guy, sorry I'll not hit on you any more.

Darn, I was kind of enjoying the attention.

Thought you might .......... did that boy get his rubbers?

Foot rubbers .....

Got my rubbers! Thanks hoseppi. Checks in the mail.

never leave home without your rubbers

Foot rubbers? .... I don't evan wants to know. Slip sliding away, slip sliding away.

subframe?
where are you located?

I have plenty of them. My location is included with my ID. Why don't you do the same.

i am in aurora il
although the car is stranded in glendale heights il

IS it stranded because of the sub frame?

I have a 98 Saturn SL and need a few parts
passenger side side view mirror
both sun visors
interor coin holder near e-break on the base 5spd model

let me know on availability and prices shiped through PM

drivers side power mirror .my housing looks good can just the guts be replaced?
if not then i need the whole power mirror in clean silver color.

hey man im looking for a 2000 saturn sc2 bumper cover. ive been looking everywhere and it would help me out alot if u were to sell it for a good price. im also looking for a couple of other parts but the bumper cover is priority. please get back at me thanks

any oem floor mats for an 02 sc2??gray or black

I do, but they are 9 years old, and they aren't really similar to wine, if you get my drift...I mean they are floor mats.

well if you can send pictures of them to "joe3857@aol.com" that would tell the story .

i could certainly buy some at the car stores but they wont be molded to the floor pan like originals so....

Do you possibly have a driver and passenger seat for a 96 or 97 sc1? A driver's seat is the more important of the two. I have a huge hole in the left side of the driver's seat. The metal kinda gets ya when you go to get out.

by chance would you have a blinker pigtail ( the wire and connector bulb goes into) for a 97 sl2, and maybe a white fender for the same car ?

hoseppi,

I am looking for an engine computer (ECU) for '02 SC2. Do you have one available? I think '00-'02 were the same.

Thanks

Andy

do you have a timing chain cover for a 1.9 DOHC ? its a '99 SL2 thanks.

i have a 97 sl2 DOHC 5 speed tranny that blew apart sunday night ... was wondering if ya had any

looking for an sl2 2000 dohc engine

I am looking for muffler and pcm for 2000 saturn lw200 wagon 3.0 liter engine

do u have a front sway bar / stabilizer bar?

do u have a front sway bar / stabilizer bar?

For what car knumbnuts?

wow -- that was harsh

yet strangely appropriate..........

(maybe I'll edit out the name calling.....nah)

I do. Which model? (in this case there's a good possibility the part is the same as long as it is an SC or an SL- but again I have to guess because of the limited amount of info given). Shipping may be prohibitive.

96 sl1, im in chicago IL

I do. Which model? (in this case there's a good possibility the part is the same as long as it is an SC or an SL- but again I have to guess because of the limited amount of info given). Shipping may be prohibitive.
Wrapped in bubble wrap only and secured with tape might be a lot cheaper than you think. I have used that method to ship UPS fenders. Wrapping that way sort of gets around size restrictions, wrapped in bubble wrap and tapped up good actually is valid and it is tough to damage a sway bar. Also like this. Greyhound is an option.

please? :)

I'm looking for the driver side rear window black trim piece for a 2000 LS2. Any chance?

apparently please doesnt work.....

You got one in good shape? My mounting flanges are craking away from the cover!

apparently hos hasn't been by to see the request

How about a bumper that will fit a '98 SW/SL? SW1 or 2 doesn't matter, but I prefer 2...

I do, but that's a tough one to ship- you should be able to find it locally.

was hoping u had a tranny 5 speed dohc for a 97 sl2 ... miles readoff would be great too ..... also a price??? if ya need a zip mines 15849

was wonderin about a engine too ... idk if it matters what year since they all look the same lol

You wouldnt happen to have a computer from a '99 DOHC Manual would you?

Do you have a sunroof motor for a 1998 SC2?

You wouldnt happen to have the trunk carpet to an sl2 in a dark charcoal color?

pic of my carpet for ref. (http://i1195.photobucket.com/albums/aa397/Octavious99/2011-12-02_13-14-37_91.jpg) When I put in my old subwoofer my brother thought it would be a great idea to cut an outline of the woofer in the carpet.
(take your time though, im in no rush gotta get some money together)

do you happen to have a headlight for a 2002 SC1? driver's side

Do you have a passenger side rear quarter panel for a 1998 SC1 in the dark blue color?

do you have headlights for a 96 sl1?

i need the hub assembly and housing bearings wheel studs everything for a 93 sl2 please let me know asap thanks man passenger side

I have the complete strut for what I think is the passenger side. I would have to verify that by checking because I don't remember. But the complete assembly. Heavy and shipping will not be cheap.
If interested.

I dont need the strut just the iron hub housing hub assembly spindle and studs no ball joints or tierods

It is a passenger side assembly I can remove the strut. From that point on the rest is up to you. It is complet from the axle half out to the nut that holds the rotor on. I leave dissassembly up to you. The bearing you are looking for is in the steering I knuckle. I have replace those on two Saturns. According to service information they are no replaceable. They lie. I've done it.
If you can't get one from some one else get back to me. I'm thinking cheap at a C note plus shipping. Lemme know. It is from an S car. I forget the year and I am sure they are interchangable. I bought it when I had a chance for my 94 as parts stash.

here is what im looking for just to be sure

-Yup-

so how much for shipping and how much u want for the part