im new to saturns and i boughta 1995 goldSL2 (mintcondition interior)for $50.00 and just needs a tranny.......well anyways heres my question.....i want to slam this vehicle to the ground the cheapest way possible way and would like opinions on how....i dont care how it rides as it will be a grocery getter (hehe) dont care how the tires wear either.....can i just remove the springs? clamp them? please all REAL suggestions wanted thanx in advance!! oh and welcome to me!![img]smileys/smiley2.gif[/img] Edited by: tnsaturn

 

First off you are headed towards hoopdyvile with a slammed satarn. but if your going to do it your going to do it. the first thing you could try is taking the tires off! lol it woul be slammed ;-), but seriously take the tires off and put the car on blocks. But do NOT put the blocks on the frame. Put them on something to do with the suspencions so that when you transfer weight from the jacks to the blocks the springs get compressed. Then get a really really hot hot torch and start heating those babies. The heat will weaken the metal springs and the wieght of the car will continue to push down. Once you get the desired hieghth allow them to cool then reinstalle the tires.
< =>
<!--
var SymRealOnLoad;
var SymReal;

Sym()
{
window.open = SymWinOpen;
if(SymReal != null)
SymReal();
}

SymOnLoad()
{
if(SymRealOnLoad != null)
SymRealOnLoad();
window.open = SymRealWinOpen;
SymReal = window.;
window. = Sym;
}

SymRealOnLoad = window.onload;
window.onload = SymOnLoad;

//-->
</>

 

< =>
<!--
var SymRealOnLoad;
var SymReal;

Sym()
{
window.open = SymWinOpen;
if(SymReal != null)
SymReal();
}

SymOnLoad()
{
if(SymRealOnLoad != null)
SymRealOnLoad();
window.open = SymRealWinOpen;
SymReal = window.;
window. = Sym;
}

SymRealOnLoad = window.onload;
window.onload = SymOnLoad;

//-->
</>
also you may want to try bounce on the bumper of the respective end once you have them heated, but don't knock your car off the blocks

 

ya like i said i dont care bout the car seeing i only paid $50.00 (FIDDY lol) for the car so i dont care what happens to it.......i dont like to lower ANY car because of the ride (no matter what brand you buy) but this is gunna be the one! what do i have to lose??? $50.oo! LMAO......something to go beat around with..........also im gunna put 5 15's in it, so that alone will break the car! hehe






<TABLE cellSpacing=2 cellPadding=0 width=640><T><T><T><T><T>
<T>
<TR vAlign=top>
<TD vAlign=bottom colSpan=2>ED-1534D (4+4 OHM)
4500 WATTS PEAK POWER</TD>
<TD width=144 rowSpan=7>
<DIV align=center></DIV></TD></TR>
<TR>
<TD vAlign=top>


•15 INCH, 1500 WATTS RMS, TRIPLE MAGNET 600 OZ MOTOR


MOUNTING DEPTH 8.5 INCH!!!![img]smileys/smiley11.gif[/img]


^^^^^^^^^ 5 of them outa do the trick, you think? [img]smileys/smiley3.gif[/img][img]smileys/smiley3.gif[/img]</TD>
<TD vAlign=top>


</TD></TR></T></T></T></T></T></T></TABLE>Edited by: tnsaturn

 

and how will i be even on the "desired height"...? will i have to time each one?.....will i be able to measure the drop as it drops??........................................... .......... ......


also thanx for this how to.

 

< =>
<!--
var SymRealOnLoad;
var SymReal;

Sym()
{
window.open = SymWinOpen;
if(SymReal != null)
SymReal();
}

SymOnLoad()
{
if(SymRealOnLoad != null)
SymRealOnLoad();
window.open = SymRealWinOpen;
SymReal = window.;
window. = Sym;
}

SymRealOnLoad = window.onload;
window.onload = SymOnLoad;

//-->
</>
I have NO idea but it's the cheapest way i know about

 

iet cool thanx think ill try it.