< src="http://www.google-analytics.com/urchin.js" =text/>
</>
Might need an ecu for a 93 SL2 Dohc Auto. Let me know what you got.
< =text/>
_uacct = "UA-939292-47";
urchinTracker();
</>

 

< src="http://www.google-analytics.com/urchin.js" =text/>
</>
Anyone have one of these anywhere. I can't find one, need some help.
< =text/>
_uacct = "UA-939292-47";
urchinTracker();
</>

 

Why do you need one? Its very, very rare that these PCM's go bad.

 

&lt; src="http://www.google-analytics.com/urchin.js" =text/&gt; </>Yes, I need one. It's the only thing left to replace.I went through 3 trannies and a new valve body, with all the same results. I have since replaced all the timing components with new sensors everywhere and a new fuel system(not that any of this causes the tranny problems). I have no where else to turn. Off topic, whydo these post keep adding links to them.</>
< src="http://www.google-analytics.com/urchin.js" =text/>
</>

< =text/>
_uacct = "UA-939292-47";
urchinTracker();
</>Edited by: 93sl2

 

What were the year and models of those three transmissions?

To get rid of those links, go to settings, then forum prefrences then under "Enable the WYSIWYG post editor" select NO.

 

One was from a 93 and the others are a 94, as with the valvebody.

 

Used parts?

Since tranny problems are common, especially when the majority of the public dont properly maintain their vehicles, I wouldnt trust used automatic transmission parts.

 

One tranny had like 68k on it and the other two were said to have under 50 and the valve bodies were reman. I dought all three trannies would do the exact same thing though, I mean they do everything to a tee the same.

 

How the condition of the connector on the top of the transmission?

Like I mentioned above, I seriously doubt its the PCM. They either work and the car runs or they dont and the car sits there dead.

 

It look good from what I remember. I will have to chenck it out when I go on leave. So in like a week I can get a better Ideal.