Engine & Internal Chat about beefing up your engine's insides here...

so much for getting back on track.

Thread Tools
 
Search this Thread
 
  #1  
Old 07-20-2014, 11:19 PM
goaliemo's Avatar
Senior Member
Thread Starter
Join Date: Mar 2014
Location: Louisiana
Posts: 1,363
Default so much for getting back on track.

glad my vacation starts tomorrow. go to get my sister from work tonight,
and I hear this ticking sound I suppose. I don't even know how to search for this (yes, I know the search engine but Ion ticking noise probably wont get me far)
Here is a sound clip, I hope one of you guys can helps so I can fix this this week.


https://www.youtube.com/watch?v=-61w...ature=youtu.be
 
  #2  
Old 07-21-2014, 07:54 AM
Rubehayseed's Avatar
Senior Member
Join Date: Jul 2011
Location: Anniston, AL
Posts: 4,902
Default

You got oil in the car, Billy? That sure sounds a lot like valve noise to me.
 
  #3  
Old 07-21-2014, 08:39 AM
goaliemo's Avatar
Senior Member
Thread Starter
Join Date: Mar 2014
Location: Louisiana
Posts: 1,363
Default

yes I do. Literally just changed the oil. I know I have an oil leak somewhere, but its like a quart every 2k miles.
 
  #4  
Old 07-21-2014, 05:53 PM
goaliemo's Avatar
Senior Member
Thread Starter
Join Date: Mar 2014
Location: Louisiana
Posts: 1,363
Default

someone else said it might be a stuck pulley? Gonna look into that too.
 
  #5  
Old 07-22-2014, 07:51 AM
Rubehayseed's Avatar
Senior Member
Join Date: Jul 2011
Location: Anniston, AL
Posts: 4,902
Default

Spray some carb cleaner or WD-40 or something around your intake manifold. It almost sounds like a leak there. Of course, that will only change the idle if it's an intake leak. If it's an exhaust leak, it won't make a bit of difference. It doesn't sound much like a pulley to me, but I'm not a mechanic. I've just been working on my own cars for over 40 years.
 
  #6  
Old 07-22-2014, 02:20 PM
goaliemo's Avatar
Senior Member
Thread Starter
Join Date: Mar 2014
Location: Louisiana
Posts: 1,363
Default

I am going to try that too. Im just trying to get a few different opinions on it so I at least have an idea. I don't want to just start unbolting everything and be screwed in the long run.
 
  #7  
Old 07-22-2014, 04:30 PM
goaliemo's Avatar
Senior Member
Thread Starter
Join Date: Mar 2014
Location: Louisiana
Posts: 1,363
Default

so, I changed the spark plugs, again. and the noise seemed to have stopped. im slightly confused. im about to take the car out again, and I should know for sure.
 
  #8  
Old 07-22-2014, 05:37 PM
goaliemo's Avatar
Senior Member
Thread Starter
Join Date: Mar 2014
Location: Louisiana
Posts: 1,363
Default

nope. didn't help. so gonna run the pully cleaner through. and clean the intake manifold. see if that helps.
 
  #9  
Old 07-22-2014, 05:56 PM
Rubehayseed's Avatar
Senior Member
Join Date: Jul 2011
Location: Anniston, AL
Posts: 4,902
Default

Do you hear any kind of noise is you manually rotate the engine, man? I know you can't turn a lot of rpms this way, but if you have a bad pulley or bearing perhaps it would squeak or scrape that way and you can narrow down its location.
 
  #10  
Old 07-22-2014, 06:41 PM
goaliemo's Avatar
Senior Member
Thread Starter
Join Date: Mar 2014
Location: Louisiana
Posts: 1,363
Default

I have to try that.
I love this car to death, but when I have an issue, its major. There is never an in between, yuh know?
 


Quick Reply: so much for getting back on track.



All times are GMT -5. The time now is 04:57 PM.