Electrical problem in MAP sensor?
#1
Electrical problem in MAP sensor?
I replaced the MAP sensor on my '06 Ion 2 with 2.2 ecotec engine. Still getting an OBD II codes for System Lean Bank 1 & MAP sensor. MAP sensor input voltage on green wire is 4.61. At 5 inches vacuum, drops to 3.60. At 10 inches, drops to 2.70. At 15 inches, drops to 1.80 & drops to 0.95 @ 20" vacuum. Seems right % drop at each step, but is the input voltage too low - read it should be 5 VDC. Any help would be appreciated.
Last edited by drs1023@yahoo.com; 04-09-2016 at 02:52 PM. Reason: Add info
Thread
Thread Starter
Forum
Replies
Last Post
CocoRomo
Saturn Astra
21
06-27-2017 09:19 AM
thatsreality
Private 'Wanted' Classifieds
0
04-09-2007 03:43 AM