A few weeks ago i had problems over heating. So I checked the coolant. It was fine. I checked the fuses and replaced one. It was for the cooler fan #2. It is a 30A fuse. The car no longer over heated..wrong. I also changed my radiator fluid. But the fuse has blown again and i do not know why. Any help so as i don''t have to keep replacing it would be of great appreciation.

Touchless

wires touching or fan drawing too many amps? Happens when a fan is
going bad on any application.Edited by: 95jive

Fuses blow because something is shorting out or drawing more amps then the fuse rating.

I have found that if the bearing in the fan fails, the current to run the fan goes way way up ultimately blowing a fuse. Perhaps the fan is defective and needs to be replaced