View Full Version : selling 1993-1995 saturn parts


ottjoe88
10-20-2005, 07:24 PM
i have almost any part you need for your saturn. doors,engines, transmissions,etc. leave a post

tnsaturn
02-11-2006, 09:32 PM
well im looking for an auto trans for a 95 sl2.....whatcha got?

ottjoe88
02-14-2006, 03:01 AM
have one minus brain lying around.

spaz
02-26-2006, 12:25 AM
hey what would it cost for a new sl2 motor? i have 180k+ on this one and i wanna have a spare ya know?

ottjoe88
02-27-2006, 05:02 PM
I know a wrecking yard hear in modesto, Ca that I can get one with under 100k for $350.00

euroc
03-12-2006, 02:37 AM
I could use some the interior floor mats, upper interior door trim, and center armrest console if you have it and its in gray and good shape.

ottjoe88
03-13-2006, 05:05 PM
i have some call me at 209-522-1313

euroc
03-13-2006, 05:07 PM
It would be better if you can just email me pictures. Send me an email to euroclydon01@hotmail.com (euroclydon01@hotmail.com) and I will reply from my real email addy.

ottjoe88
03-13-2006, 05:14 PM
i don't have a camera available, i have two cars of that body style with grey interiors

euroc
03-13-2006, 05:16 PM
and are the parts in great shape? All the clips there, etc?

ottjoe88
03-14-2006, 01:16 AM
yep, which is rare, the only thing i am not sure about is the center console

ottjoe88
03-14-2006, 01:22 AM
where are you located

euroc
03-14-2006, 01:44 AM
Zip code 73110, Oklahoma City.


I also need the visors, if they are in good shape. So thats the upper front door trim (goes from dash and follow seat belt track) both visors, all four floor mats, CD player, and center armrest. All the parts need all the retaining clips (as you know car plastic breaks real easy) need to be in good overall shape, (mild discoloration, wear is normal, no scratches tears or stains). I'm not in any huge hurry, but let me know what parts you have or can get, and how much it will cost to ship them. I also need the plastic pieces that fit around the seat belt connection (at the top, above the red button) and the drivers side lap belt guide. I may sendyou pictures of what I need and the colors, so we can make sure there is no confusion.


Thanks

ottjoe88
03-14-2006, 02:21 AM
send me pics so we are on the same page

euroc
03-14-2006, 01:01 PM
Okay, I'll try to do it sometime today. Whats your email address?

ottjoe88
03-14-2006, 05:43 PM
ottjoe882000@yahoo.com

euroc
03-14-2006, 07:24 PM
okay, got it. I'm not sure if I will be able to send them out today, but it should be by the end of this week. I work nights, and sleep all day but I will try to take them tonight, and send them soon.

Edcon83
03-30-2006, 09:16 PM
I am looking for a radiator for a 93 sc2 and a headlight motor for the right headlight. Can you help me?

euroc
04-13-2006, 04:01 AM
I meant to send those pics ott...probably wont worry about the parts for the time being though. Some bumps in lifes road smileys/smiley2.gif

joe93SW2
05-03-2006, 12:59 PM
Saturn makes a replacement clip for those upper front door interior trim pieces. I have not tried them yet but I will when I get the car. It is an awful design, as those plastic snubs ALWAYS break off when pulling out of pillar. I go to the junk yard and findsome good trim pieces and it breaks off without fail. The replacement clip grabs on to the bottom most portion of where the snub comes out of so it looks like it should work with no need to replace whole trim piece anymore. Saturn so a problem and came up with a solution.smileys/smiley1.gif


I think I am going to, at least on the drivers side, replace the automatic seatbelt with the passive as soon as I find a 94 or 95 in the junk yard, as it shouldwork with minimal rework. It worked with a mitsubishi I had and I only had to drill one hole in the pillar to accept the retractor assy. The great thing is the junk yards are justfilled with these cars that are just coming to the end of their lives while mine lives on.smileys/smiley4.gif

codydakota
10-08-2006, 03:53 AM
need drivers seat in good shape, got it? How much? Thnks

Bryanb1229
12-31-2006, 04:55 PM
Is it a TBI motor. I need the one fuel injector if it is good ASAP

consig
03-01-2007, 05:45 PM
Hey, I am looking for the electrical connector for the throttle
position sensor for an SC or SL. Please let me know if you have this and if you can
send me a picture so i can see if it is the right one. Thanks so much.
consig@cooper.edu

94503
04-17-2007, 08:40 PM
i need a 94 motor 91 valves 99 rods and pistons

gophaster
05-07-2007, 05:42 PM
Hi, I need a working 1994 SC2 instrument cluster? Got any?


Let me know!


Thanks.

biglou
10-22-2007, 09:53 AM
Im a looking for a starter for a 95 SL1,





Let me know if you can help





Thanks

kenzspen2000
10-23-2007, 01:43 PM
looking for an egr adapter for an old style twin cyl head 21006753